Lift UPS

Lift UPS

Lift UPS Power Generating System with MPPT is Double Conversion with Load Sharing Technology. This is one of the advanced technology in the market to utilize 100% of Solar PV Generated power by enhancing Solar Power through MPPT Load Sharing and current control technology which can be used for sensitive, sophisticated and industrial loads.

The output load is completely isolated from input by using Double conversion technology and also our Solar UPS Out power is constant for 24/7 without any fluctuation.

The Solar power is utilized maximum level even during cloudy season. The priority is always for Solar Power. Solar Power and Electric Board(EB) Power will be paralleled and will work together but always priority is for the Solar Power. After utilizing Solar Power still if load required more than Solar generated power. Our Solar UPS Smart Dual Sharing technology will allow EB Power to feed the power to Inverter Input. So Output load is protected with Uninterrupted Clean Power.


 Three Phase Line Interactive technology

 Your Elevators and Lifts will never STOP during power failure whereas other Lift UPS will have 1min to 3min delay when power fails

 Advanced DSP based IGBT technology with Small foot print and high efficiency

 Single Phase prevention, Phase reverse, Low and High voltage, Complete protection for your Elevators and Lifts

 20*4 line LCD to display all the parameters of Lift UPS along with Alarm

 Enhances your battery backup with Auto shutdoen during-No load and Auto restart On load

 Pure Sinewave with 20KHz operating frequency

 Eco friendly and absolutely Sound less Operation, Solar compatible

 DSP based control guarantees high reliability

 Pure Sine Wave output

 30% More energy is harvested by using MPPT solar charger

 Auto opriority logic in the charger for both mains and solar inputs

 If the load is less than 5W, the inverter automatically switches to sleep mode to save power

 Compact and light weight

 User friendly installation

 High efficiency and extended backup time

 Normal and Computer mode <

 Noiseless operation of fans, lamps and Home

 Liquid crystal display

During Day time, Cosmic Lift UPS will work as Solar Power generating System which will generate the power by using Sunlight through Solar Photo Voltaic Modules priority will be for Solar Energy. When Solar Power is available our Solar Hybrid System will charge the battery completely through Solar Charger. The MPPT Charger will enhance the Solar power by 15 to 30% Once Battery is fully charged based on availability of SPU Power. It will supply the Solar Power to output load without any interruption by switching of the EB Power to ensuring 100% utilization of Solar Power so you need not depend on EB Power. When Sunlight power is not available this will reconnect the EB Power to ensuring the uninterrupted power supply. Even during power cut, in the night the stored Solar Power from the Batteries can be utilized as backup power.

DESCRIPTION SOLAR SINEWAVE UPS TECHNICAL SPECIFICATION
TECHNOLOGY 3 Phase Line Interactive, IGBT, DSP and PWM based
MODEL CLU 06 to CLU 250
CAPACITY 6 KVA to 150 KVA
AC INPUT Voltage 415V AC +15% or -20%, 50Hz +/-6Hz
100V – 300V AC for lighting
AC utput Voltage < 400/415V AC +/- 1%, 3Phase 4 Wire(on Battery Mode)
Wave Form Pure Sinewave
Output Power factor and THD 0.8 to 1Lagging, <3% with Linear load
Cooling > Forced Air
Protection Input Under and Over Voltage, Single Phase, Reverse Phase, Output Under and Over Voltage, Overload Short Circuit, battery low and Over Charge with Alarm
Communication RS 232 and SMS Alerts(Optional)
Application Elevators, Lifts, Motors, Lightings or any kond of three phase load
 Enquiry